This I LumoS 15 X 25mm BLUE Flexible IP65 Waterproof* Dimmable Neon LED Strip Light 220 – 240V 14W/m has a translucent High quality Silicone cover that offers uniform light and performs better than the standard Strip lights with visible individual LED Chips. Because it’s so flexible, its installation is simple and doesn’t require any specific tools, allowing it to adapted it to all sorts of corners, logos, signs, etc. The waterproof feature of the Light makes it ideal for Indoor and Outdoor* use.
Silicone cover has a high quality finish that offers a longer life than standard PVC covers. You can rest assured that the Silicone cover will last longer and not discolour like PVC covers
The Neon LED Flex Light comes with a Plug as standard for mains use but can also be controlled by any LED compatible Light switch including I LumoS Touch On/Off and Dimmer Light switches.
The 220V AC Neon Flex Lights can be cut Every 1m at Marked Intervals and comes with a Plug Connector & End Cap
All I LumoS Products are Designed and Assembled in the UK and are Installed using Standard Wiring.
This LED light with its neon effect and flexible composition has a visually attractive and innovative design that’s perfect for any Home,Office or setting . They have a high level of versatility that allows you to bend and shape the light into almost any shape or form
This product is supplied with a Rectifier Cable and an End Cap. For perfect IP65 protection, the client must make sure to protect these lights and the plugs correctly.
*For outdoor use, Heat Shrinks must be used on the Plug Connection and the End Cap to protect Strip against water damage. If the plug and End Cap is to be used outside, Waterproof sealant or Waterproof casing use is highly recommended. Incorrect Ingress Protection will void the warranty. Please contact us us for outdoor use assistance.
| Power: | 14 Watts/Metre |
| Power Factor: | 0.97 |
| Light Source: | SMD2835 |
| Number of LEDs: | 120/m |
| Size: | 15×25 mm |
| Material: | Silicone |
| Dimmable: | Yes |
| Diffuser: | Frost |
| Warranty | 2 Years |
| Certifications: | CE & RoHS |
| Voltage: | AC 220-240V |
| Beam Angle: | 180º |
| Life Span: | 30,000 Hours |
| IP Protection: | IP65 |
| Frequency: | 50-60 Hz |
| Protection Class: | II |
| Length | 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m, 15m, 20m, 25m, 30m, 50m |
|---|---|
| Plug Type | UK Plug |
10 reviews for I LumoS 15 X 25mm BLUE Flexible IP65 Waterproof Dimmable Neon LED Strip Light 220 – 240V 14W/m
Add a review
Related products
Single Sided Neon
I LumoS 15 X 25mm RGB Flexible IP65 Waterproof Dimmable Neon LED Strip Light 220 – 240V 14W/m
Single Sided Neon
I LumoS 15 X 25mm GREEN Flexible IP65 Waterproof Dimmable Neon LED Strip Light 220 – 240V 14W/m
Brackets & Profiles
I LumoS 5cm Aluminium Bracket For Single Sided Neon Strip Lights
12V Accessories
Double Sided Neon
GLENN DRAPER (verified owner) –
OK Lets hope that people read the revues as I would like to help those who purchase after me !!!
1. Please understand that you will need to order the following
a) if you need to join any of the flesible led strip togerther you will need part No. ILS 2ps ( this is a small plug that has a barbed end and a pin at each end. NOTE: make absolutely clear that you need the small pins “spacing” and not the “large pin spacing” you need two per joint.
b) you will also need part No. ILS 2psc25 this is a double socket that the “pin end” of ILS 2ps plugs into
c) if you need it to be waterproof you will also need ILS 25 ab-1 this is a 5cm length of shrink wrap ( use heat gun on medium setting)
OK so far so good:
If you want to dim the flexible led strips you will need an “inline” Dimmer something like a ILS11RDWG but if you do you must be aware that you will also need a small “resistor” if you only want a short length of the LED strip light ( i would say anything less than 5 mtrs.) this is connected between the live and neutral BEFORE the small white “Rectifier” on the live feed side. ( It will assist the dimmer by putting on a load and this SHOULD stop any “flicker” and ensure that the dimmer will operate correctly. Hartington SHOULD include this with your order but they did not for mine until I requested it !!!!
Finally : a remote should come “INCLUDED” when the dimmer is purchased – mine was omitted, again a delay of one day to have it posted out. ps. don’t forget that the dimmer will need to be “cloned” for the LED strip and instructions can be found on the web site under “technical Support”
I actually like this product but I think that It would benefit from more care when sending out the orders – we had lots of omissions and wrong items sent.! The Company were very apologetic and pro active to try to sort it out – but when time is money on a job we could have done without the delay.!! I hope the above helps new customers.
Bernard May (verified owner) –
Have yet to install these lights but they appear to be of good quality and the ordering and delivery process was slick.
Andrew King (verified owner) –
Better than products I’ve been using at 2 times the price! Will be using these from now on. Thanks.
Ross (verified owner) –
Easy to work with. Good quality
Russell Wood (verified owner) –
Really happy with the robust quality of the product and the quick delivery.
Dan Golding (verified owner) –
Russell Wood (verified owner) –
Good product, quick delivery but profile different to the two I purchased previously. It is actually better! My mushrooms won’t mind though!
Neil Walker (verified owner) –
Great service
Colin Buttriss (verified owner) –
Good product
Paul (verified owner) –
All looks good, still have it fit however fast delivery…