My remote control does not work with my Remote Touch Switch, is there an issue? (On/Off Only)

  • To make the remote control work all you need to do is synchronise the remote control with your Remote Switch. To do this please ensure that the remote control has battery so check that when a button is pressed there is a little red light that comes on and then follow the instructions below:
  1. Turn the lights off, with the lights off please press and hold on to the light switch button for about 5 seconds until you see a blue flashing light in the circle.
  2. When you see the flashing blue light, let go off the light switch and then press and hold A, B or C on the remote control once. D has the ability to turn off all Buttons paired to A, B and C.

How do I synchronise my Remote Control to my Remote Dimmer Switch? (Remote Dimmer Only)

  • To make the remote control work all you need to do is synchronise the remote control with your Remote Switch. To do this please ensure that the remote control has battery so check that when a button is pressed there is a little red light that comes on and then follow the instructions below: Buttons 1 to 6 are used for On/Off switches and Dim 1 to 3 are used for Dimmers.

For 1 Gang 1 Way Remote Dimmer switches:

  1. Turn the lights off, with the lights off please press and hold on to the light switch button for about 5 seconds until you see a blue flashing light in the circle.
  2. When you see the flashing blue light, let go off the light switch and then press “C” on the remote control once. “C” is used to turn the lights on off, “A” is to dim the lights and “B” is to turn the lights back up. A and B are pre-synchronised. The dimming on the remote control is in steps so press the button with a second between each press to dim the lights up or down.

For 2 Gang 1 Way Remote Dimmer switches:

  1. Turn the lights off, with the lights off please press and hold on to the light switch button for about 5 seconds until you see a blue flashing light in the circle.
  2. When you see the flashing blue light, let go off the light switch and then press Dim 1 on the remote control once.
  3. Follow the same procedure for any other Gangs the remote will be used with by using Dim 2 and Dim 3. Arrows directly under are for dimming up and down.